Video - Fork Seal Install


Videa Husqvarna WR 400 Fork Seal Install



Fork Seal Install

Installing a new fork seal. Using an old seal cut in half as the driver. This was on an 'upside down fork' - use paper to protect the chrome stanchion - and make sure you rotate and tap lightly to start - once its going in straight you can hit a bit harder. The most difficult part was cutting the old fork seal in half - I used a hacksaw and vice - then make sure you round off any sharp edges with a file. Keep the homemade 'driver' in your tool box - much cheaper than buying one + cheaper than getting the garage to do it :)

Model

Videa

Délka: 1 minut : 56 sekund
Autor: silkyR6
Shlédnutí: 14 991 x
Hodnocení: 5.0 / 5   (10 x)